Cs Seamless Pipes

Approx. Rs 150 / KgGet Latest Price

Product Details:

ASTM A53 pipe, a standard specification for black and hot-dipped, zinc-coated, welded and seamless steel pipe, is used for mechanical and pressure applications as well as ordinary uses in steam, water, gas and air lines

Approx. Rs 150 / KgGet Latest Price

Product Details:

 Low Temperature Carbon Steel (LTCS) is used in piping system when there is a possibility of process fluid temperature falling below -29 degree centigrade during operation. In typical refinery A 106 Gr B material is used for carbon steel and A 333 Gr 6 is used for LTCS in normal operation

Approx. Rs 200 / KgGet Latest Price

Product Details:

An Alloy Steel Pipe is used in applications which require moderate corrosion resistance properties with good durability and at an economical cost. To simply put it, alloy pipes are preferred in those areas where carbon steel pipes may fail. There are two classes of alloy steels - high alloys and low alloy steels. Pipes that constitute low alloy steels have an alloying content that ranges below 5%. Whereas the alloying content of a high alloy steel would range between 5% to about 50%. Similar to most alloys the working pressure ability of an Alloy Steel Seamless Pipe is about 20% higher than a welded pipe. So in applications that have a higher working pressure as a prerequisite, the use of a seamless pipe is justified. Though stronger than a welded pipe, the cost is much higher. Furthermore, the risk of intergranular corrosion at the heat affected weld zone is more in a welded product. The visible difference between an Alloy Steel Welded Pipe and a seamless product is the latitudinal seam along the length of the pipe. However, today, with the advancement in technology, the seam present on the Alloy Steel ERW Pipe could considerably be reduced via means of a surface treatment, such that it remains invisible to human eyes.